1.20 uboot
(set for dual boot using the left arrow key to boot from 2nd partition on HDD, use YELLOW BUTTON to copy ROOT & VAR to HDD, this will make ROOT read/write so you can make further changes, the only file system shared is /media)
Fantacy 2.13.6 r2 Image
Web interface, internet EPG & Extras included in the relook*.tar.gz
Upload the tar.gz file to /tmp and then pressing the YELLOW BUTTON on your remote select INSTALL ADDON. do this for each addon if you use all 3
user - root
pass - relook
web user - relook
web pass - relook
------------------------------------------------------------
Contents-
All.img (uboot 1.20)
Relook1.tar.gz (Plugins & Extras)
(the image will work as it is but to get full benifit install this)
Relook2.tar.gz (Deeptho's InternetEPG Set up for UK EPG)
(if you install this and the db.dat EPG is set up for most UK channels. you can still install this and set up the grabbers as normal or just install the orginal from YELLOW BUTTON)
Relook3.tar.gz (Deeptho's New Web Interface)
(this is the new web interface for nuemo 3.1 but it still works on the this software - Note some sections do not work, install the 1 available from YELLOW BUTTON for FULL functionallity)
mkdnimg-1.0-win32 (for converting backup images made from UI to usb images)
db.dat (Favourites for UK provider with internet EPG enabled)
ReadMe
-------------------------------------------------------------
all cred goes to the guys (nuemo, fantacy) who made all this software, altho ive done alot myself (propably not that well either). all i have done is stuck it all together in 1 image and changed to suit me and hopefully some others too. somethings wont work like fonts (does from HDD) and bootscreens i would have liked to change a few things in the root section but was unable to make squash-lzma kernal to extract it, but the rest seems ok. This is pretty much everything that has been made for the 400's to date. You WILL need a HDD to be able to install the addons.
NO Emus (install from BLUE BUTTON)
NO Keys
Plugins-
EMU-Panel
MP3-Player
Pong
Shoutcast-Player (shoucast list stored in /var/data/plugins)
SignalPopup
Skin-Panel
SpectrumAnalyzer
Sudoku
Tetris
TS-Record
User-Panel
-------------------------------
MENU KEY + (0-9)
1. Gbox(v2.25)Twin Tuner
2. Gbox Tuner 1
3. Mgcamd+Newcs
4. Mgcamd
5. CCcam+Newcs
6. CCcam
7. Camd3
8. CS2Gbox
9. Kill All Emu
0. Picture Grab (stored in /var/data/screenshots)
-------------------------------
***BLUE BUTTON***
1. Gbox(v2.25)Twin Tuner
2. Gbox Tuner 1
3. Mgcamd+Newcs
4. Mgcamd
5. CCcam+Newcs
6. CCcam
7. Camd3
8. CS2Gbox
9. Kill All Emu
--------EMU Install--------
11. Install Mgcamd/Newcs
12. Install CCcam/Newcs
13. Install Gbox
14. Install Camd3
15. ***REMOVE ALL EMUS*** (warning)
--------EMU INFO--------
17. EMU Info (mgcamd,CCcam,gbox)
18. Share Info (gbox peer list)
19. Card Info - Slot 1 (gbox info)
20. Card Info - Slot 2 (gbox info)
--------KEY UPDATE--------
22. Fantacy Key Update
23. Satan's Key Updater
24. ***REMOVE ALL KEYS*** (warning))
---------------------------------
***YELLOW BUTTON***
--------System Infomation-------
2. Free Space
3. Hard Drive Info
4. Disk Stats
5. IP Config
6. Network Stats
7. Mount Info
8. Process List
9. Loaded Modules
10. Flash Address
11. CPU Info
12. Mem Info
13. Linux Version
14. Kernal Messages (reboot needed)
15.
--------Channel DB & EPG--------
17. Install Intenet EPG (deeptho's internet EPG)
18. Register DB For EPG (after adding new channels)
19. Run & Update Internet EPG
20. Reset EPG Database (deletes the dbepg.dat)
21. Channel Renamer (puts sat position in Ch name)
22. DB Slimmer
23. Speed Scan
24.
--------Web Interface--------
26. Install_WEB_Interface__Installed_to_HDD
27. Set web interface port 8000 (reboot)
28. Set web interface port 443 (reboot)
29. Set web interface port 80 (reboot)
30.
--------System--------
32. Addon Install (put addon in /tmp)
33. Var_To_HDD
34. HDD_To_Var__Not_enabled
35. Root+Var_To_HDD (will mirror root and var to part2 of HDD,var/data is also copied)
36. Turn HDD Swap On
37. Turn HDD Swap Off
38. Backup all.img (/var/data/backups)
39. Backup all_noboot.img (/var/data/backups)
40. Backup welcome.img (/var/data/backups)
41. Turn RF Module OFF
42. Turn RF Module ON
43. LCD Display LOW
44. LCD Display MED
45. LCD Display MAX
-----------------------------------
***GREEN BUTTON***
--------Skins--------
2. Default
3. Black
4. Blue
5. Deviant
6. DGS New
7. DGS Old
8. Fantacy
9. Newbox
10. Redbox 1
11. Redbox 2
12. Fantacy Info Bar
--------Boot Screens--------
14. Blue Orb
15. Cubes
16. Dgs
17. Earth
18. Flag |
19. KillerBox | Wont install from plugin but will work from telnet (log on telnet and type /var/scripty/menu*.sh)
20. Linux |
21. Neumo
22. Neumo1
23. Neumo2
24. Orange
25. RedStar
26. RelookSupport
27. Sat 1
28. Sat 2
--------Fonts--------
30. Gothic Fonts |
31. Palladio Fonts | ONLY ENABLED WHEN RUNNING FROM HDD
32. NimbusSans Fonts |
------------------------------------
***RED BUTTON***
Spectrum Analyzer
------------------------------------
---Tuxdns---
1. Login to your box and from console Type: cd /var/bin
./var/bin/tuxdns -h host (mydns.dyndns.org) -u usernameasswort
---No-ip---
1. Login to your box and from console Type:
2. type: ./var/bin/noip2 -C
3. enter login (e-mail) //Ofcourse if you are registered at no-ip.com
4. enter password
5. Enter update interval (default is 30min change to 5)
6. N (if you wish to run something type Y)
7. at the and should be: 'New configuration file '/var/etc/no-ip2.conf' created.'
9. Type: ./noip2 to run no-ip client
10. Type: ./noip2 -S to check is everything ok
But remember! after 200s/400s reboot you must start noip2 again! (./noip2) To avoid this put line: "/var/bin/noip2" (without quotes "" at end to a file and rename it to 3.2.sh and place script in /var/data/init.d/ chmod to 755)
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Paylaş