================================================== =
Spider Fan Plugin for Dreambox 7025 Version 1.1.0
by gutemine from 3. January 2007
================================================== =
If you have questions on this Plugin or
are looking for the latest Version visit
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] or go to gutemine's kitchen at
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Thanks to BoxMan for hosting gutemine's kitchen
on his Board !!!
Thanks to OoZooN for hosting the Multiboot
Download Center !!!
Thanks to noggie and tmbinc for the nfi
Image copy program examples !!!
================================================== =
Release infos
================================================== =
1.0.0 This is the first public Version
1.1.0 Neutrino Image support added
================================================== =
Englischer Text ist unterhalb des Deutschen Text !
The English text is below the German text !
================================================== =
1) Installation
---------------
Das Spider Fan Plugin sollte es in jedem Image
für die 7025 lauffähig sein.
Zuerst das spider-fan*.ipk file aus
spider-fan*.zip auf /tmp mit FTP kopieren
(TCP/IP muss dafür im Dreambox Image natürlich
bereits funktionieren).
Wenn Du ein Image im Flash hast, das im
Blue Pannel die Möglichkeit bietet ipkg
Addons Manuell von /tmp zu installiern, so
kannst Du es verwenden um den Kit zu installieren.
Ansonsten den Kit mit folgenden Befehlen im
Telnet installieren:
cd /
ipkg install /tmp/spider-fan*.ipk
Falls das Image die Möglichkeit bietet enigma
vom Menu Interface neu zu starten, so reicht
dies aus, ansonsten die Box nach der obigen
Installation des Kits zu rebooten.
Jetzt kannst Du das Spider Fan Plugin
vom Spiele/Erweiterungen Menu bereits starten,
oder auch das spider.sh script direct
verwenden. Beide Liegen auf zusammen mit diesem
readme.txt auf:
/usr/lib/enigma2/python/Plugins/Extensions/SpiderFan
2) Verwendung
-------------
Das Spider Fan Plugin is ein Image Backuper
und Addon Grabber.
Das heisst ALLES was Ihr nach dem Flashen des
Image im Flash installiert hat wird erkannt
und von Spider Fan ins Gefängnis gesteckt - wobei
dieses ein tar.bz2, tar.gz oder sogar ein ipk file
sein kann.
Weiters kann Spider Fan auch die ganze
Stadt in ein nfi Gefängnis schicken !
Schickt einfach Spider Fan auf eine Mission
und die Kriminellen ins Gefängnis zu stecken.
Falls Ihr auch alle aktuellen Settings und Timer
haben wollt, dann evt. vorher enigma2 restarten.
Gutemine unterstützt aber KEIN illegales
Betrachten von Pay-TV weswegen böse Files
immer als Doc Rock erkannt werden
und in ein eigenes Gefängnis gesteckt
werden !!!
Und was macht man nur mit den gefüllten
Gefängnissen ?
Nun ganz einfach - nfi Gefängnisse kann
man wie üblich Flashen mit dem WebIF
oder DreamUP, um die ganze Stadt
zurück zu bekommen.
Die anderen Gefängnisse können jeweils
auf dem frisch geflashten Original
Image freigelassen werden, und alle
Änderungen zum Zeitpunkt der Spider
Fan Mission sollten wieder da sein !!!
Nur bei Doc Rock sollte man wissen was
man tut wenn man Ihn freilässt !!!!
Also einfach Original Image Flashen,
beim Booten Startup Assistenten sofort
beenden und dann die Gefängnisse
auf Bewährung öffnen.
Dann Spider Fan installieren und dort
Release on Parole auswählen.
Wenn Ihr es von Hand machen wollt und
auch Eure Settings aus
dem Gefängnis zurück haben wollt, dann
müsst Ihr vor dem Freilassen
enigma stoppen:
init 4
Und dann von Hand Gefängnisse
auspacken:
cd /
ipkg install -force-ovewrite /media/hdd/spider*.ipk
oder:
gunzip /media/hdd/spider*.tar.gz
tar -xvf /media/hdd/spider*.tar
oder:
bunzip2 /media/hdd/spider*.tar.bz2
tar -xvf /media/hdd/spider*.tar
Wenn Ihr die Gefängnislokation
geändert habt, oder einen anderen
Gefängnisnamen gewählt, müsst
Ihr obige Kommandos natürlich
entsprechend anpassen.
Wenn Das Image ein Blue Panel
hat kann man natürlich auch damit
die Gefängnisse vom enigma2 aus
auf Bewährung öffnen.
Es sind jetzt auch Neutrino
Images vom spider.sh skript
unterstützt, fürs Neutrino GUI unter
Skripten nachschauen - im Prinzip geht
alles was im Enigma2 geht nur kann man
halt im Moment keine eigene Namen
für die Gefängnisse eingeben weil nur
über fixe Skripte gestartet wird - Ihr müsst
also mit den Defaultnamen leben, oder
unter Neutrino Spider Fan im Telnet benutzen.
3) Warnungen
------------
Bitte nicht probieren die Verbrecher in eine
andere Stadt/Image als das Orignal Image
zu bringen, das kann gut gehen, bei CVS mit
dem gleichen Stand, kann aber auch die
Stadt/Image zerstören !
Weiters müsst Ihr aufpassen wenn Ihr nach
dem Spider Fan das Gefängnis gefüllt hat in
die Stadt neue Verbrecher bringt und dann
die Verbrecher aus einem alten Gefängnis
auspackt. Dies kann gut gehen (je
nachdem wer was überschreibt), wird aber
wahrscheinlich schiefgehen !
Empfohlen ist IMMER immer wenn es neue
Verbrecher gibt, eine neue
Mission zu machen und das
Gefängnis auch IMMER nur für die
ursprüngliche Stadt/Image zu verwenden !
Ansonsten ist es natürlich immer besser
die ganze Stadt als nfi Gefängnis
zu sichern, diese können dann auch
ohne Probleme wieder durch normales
Flashen entpackt werden.
================================================== ==
Viel Spass mit dem Spider Fan auf der Dreambox 7025 !!!
================================================== ==
1) Installation
---------------
Spider Fan Plugin should be working with
any 7025 image.
First copy the spider-fan*.ipk file from
spider-fan*.zip to /tmp with FTP (TCP/IP
must be working already).
If you have flashed an image that offers a
Blue Pannel Manual ipkg Installation, you can
use this functionality to install
the kit.
If not, then install the whole files by
entering the following commands in a
Telnet session:
cd /
ipkg install /tmp/spider-fan*.ipk
If the image offers an enigma2 restart
functionality this is sufficient, if not
simply reboot after extracting the kit.
Now you can start Spider Man from the Plugins
Menu or via the spider.sh shell script.
Both reside together with this readme at:
/usr/lib/enigma2/python/Plugins/Extensions/SpiderFan
2) Usage
--------
The Spider Fan Plugin is an Image Backup and
Addon Grabber.
This means that EVERYTHING that you have installed
in Flash after Flashin the Image is detected and
will be put to Jail by Spider Fan.
There are 3 Jailtypes supported - tar.bz2, tar.gz
or even an ipk file.
Alternatively you can put the entire City
into an nfi Jail.
Simply send spider fan on a mission to
send the crominals to jail !
If you want to have also your current settings
and timers saved, then maybe do an enigma2
restart before starting the mission.
Gutemine supports NO illegal Viewing of
Pay-TV hence evil Files are detected
as Doc Rock and put to an extra jail !
And what do we do with these filled jails ?
Well this is simple - you can Flash the nfi
Jails as usual with the WebIF or DreamUP
to get the entire city back.
All the otehr jails can be released
on parole on the freshly flashed original
Image and all your modifications should be
back !
But be carefull if releasing Doc Rock,
you should know what you are doing in
this case !!!
So simply Flash the Original Image,
during Boot exit the Startup Assistent
immediately and then Release on Parole
from the Jail.
You can install the spider fan plugin
and do the Release with Parole there.
If you want to do it manually and want
also your settings back then
you have to stop enigma first:
init 4
And then you have to release manually:
cd /
ipkg install -force-overwrite /media/hdd/spider*.ipk
or:
gunzip /media/hdd/spider*.tar.gz
tar -xvf /media/hdd/spider*.tar
or:
bunzip2 /media/hdd/spider*.tar.bz2
tar -xvf /media/hdd/spider*.tar
If you changed the location
of the jail or have choosen
another jail name the above
commands need to be adapted.
If the image offers a
Blue Panel you can use this also
to release on parole from the
jail.
Now also Neutrino Images are supported
by the spide.sh script, for Neutrino GUI
look at Scripts within Neutrino. In Priciple
everything works that works under Enigma,
you only cann't pass jail names from GUI
at the moment and have therefore to live
with teh default names or use spider fan
from Telnet under Neutrino.
3) Warnings
-----------
Please don't try to release the prisoners
from a jail in another city/image. This
could work if they are similar CVS Levels,
but it could also destroy the city/image
completely.
If you have new criminals in your city
and want to release the criminals from
an elder jail then be also carefull, this could
worky (depending who overwrites what)
but is likely to fail.
It is therefore recommended if you have
new criminals in your city to make
ALLWAYS a new mission, and release
jails only in the original city.
Hence it is always better to use nfi
Jails of the entire city which can be
safely flashed !
============================================
Have lots of Fun with Spider Fan on
the Dreambox 7025 !!!!
============================================
Paylaş