2008/06/09
v1.30b
Fix For Irdeto Net Sharing With G: 09, Kathrein Is Back
2008/06/09
v1.30b
Fix For Irdeto Net Sharing With G: 09, Kathrein Is Back
Hallo D-king,
irgendwie funzt es nicht. Wenn ich auf der commandline starte, dann erhalte ich folgende Fehlermeldung:
mkdir: Cannot create directory `/program/d/': File exists
ln: /program/d/de0: File exists
ln: /program/d/de1: File exists
ln: /program/d/de2: File exists
ln: /program/d/de3: File exists
ln: /program/d/de4: File exists
ln: /program/d/de5: File exists
ln: /program/d/de6: File exists
ln: /program/d/de7: File exists
tuxbox mgcamd v1.26 by mixvt (compiled Dec 2 2007 16:36:55)
[mg] Net:8:7:0:5s Show ecm:1, emm:1 Up:4 Au:1 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: openbox
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
M: parse error
D: parse error 1
Me: host id 0000 port 0 max send 7 max dist 4
Virtual card 0500:007C00 slot 1
Virtual card 1801:000401 slot 2
Virtual card 1801:004001 slot 3
Virtual card 1801:004101 slot 3
Virtual card 1801:000501 slot 4
Virtual card 1801:000503 slot 4
Virtual card 1801:000505 slot 4
Resend time: normal 2000 4000, nds 400 500
Ports to monitor:
[mgcam] emm thread started
[mgcamd] tps update started.
[mg0] service 6D68 index 0 pmt pid 0 (1)
[mg0] No supported encryption system found
[mg0] stopped
[mgcamd] emm started
[mgcamd] emm stopped
[mgcamd] signal 2 received
Was habe ich vergessen?
Gruß
derKnipser
Konu derknipser tarafından (14.06.2008 Saat 12:29 ) değiştirilmiştir.
Tja schwer zu sagen. Welches Image, und wie sieht deine mg_cfg aus??
Wieso Box type: openbox ??
Fehler sind hier:
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
M: parse error
D: parse error 1
.....
[mg0] No supported encryption system found
[mg0] stopped
Wieso zeigt es bei dir die version 1.26 an?
Ausserdem gibt es eine neuere version versuchs mal damit.
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
nun ja, ich habe schon das Rar-File von Dir genommen.
Kann es aber gerne noch einmal versuchen.
Die startet leider gar nicht.
Fehlermeldung:
/program # ./_start_emu
/program/mgcamd: /program/mgcamd: 1: Syntax error: "(" unexpected
Kurze Randbemerkung: Ich habe eine UFS822.
Konu derknipser tarafından (14.06.2008 Saat 14:38 ) değiştirilmiştir.
derknipser Nickli Üyeden Alıntı [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]..Kurze Randbemerkung: Ich habe eine UFS822.
Wahrscheinlich liegt da das problem. Das Binäres ist wohl für UFS910.
Paylaş