turk-dreamworld.com Sitesine Hoşgeldiniz.


5 sonuçtan 1 ile 5 arası
  1. #1
    Administrator d-king - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    May 2007
    Mesajlar
    9.440
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    7.394 Toplam

    Standart Mgcamd 1.30d Kathrein

    2008/06/09


    v1.30b
    Fix For Irdeto Net Sharing With G: 09, Kathrein Is Back
    Eklenmiş Dosya Eklenmiş Dosya
      Mesaja cevap vermeden eklentiyi indiremessiniz
    AlıntıAlıntı

  2. #2
    Junior Member derknipser - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jun 2008
    Mesajlar
    2
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    0 Toplam

    Standart AW: Mgcamd 1.30b Kathrein

    Hallo D-king,
    irgendwie funzt es nicht. Wenn ich auf der commandline starte, dann erhalte ich folgende Fehlermeldung:
    mkdir: Cannot create directory `/program/d/': File exists
    ln: /program/d/de0: File exists
    ln: /program/d/de1: File exists
    ln: /program/d/de2: File exists
    ln: /program/d/de3: File exists
    ln: /program/d/de4: File exists
    ln: /program/d/de5: File exists
    ln: /program/d/de6: File exists
    ln: /program/d/de7: File exists
    tuxbox mgcamd v1.26 by mixvt (compiled Dec 2 2007 16:36:55)
    [mg] Net:8:7:0:5s Show ecm:1, emm:1 Up:4 Au:1 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
    [mg] Ecm cache time: 15
    Box type: openbox
    Conax.Key error 2: No such file or directory
    Keys readed
    Conax.Key error 2: No such file or directory
    M: parse error
    D: parse error 1
    Me: host id 0000 port 0 max send 7 max dist 4
    Virtual card 0500:007C00 slot 1
    Virtual card 1801:000401 slot 2
    Virtual card 1801:004001 slot 3
    Virtual card 1801:004101 slot 3
    Virtual card 1801:000501 slot 4
    Virtual card 1801:000503 slot 4
    Virtual card 1801:000505 slot 4
    Resend time: normal 2000 4000, nds 400 500
    Ports to monitor:
    [mgcam] emm thread started
    [mgcamd] tps update started.
    [mg0] service 6D68 index 0 pmt pid 0 (1)
    [mg0] No supported encryption system found
    [mg0] stopped
    [mgcamd] emm started
    [mgcamd] emm stopped
    [mgcamd] signal 2 received



    Was habe ich vergessen?

    Gruß

    derKnipser
    Konu derknipser tarafından (14.06.2008 Saat 13:29 ) değiştirilmiştir.
    AlıntıAlıntı

  3. #3
    Administrator d-king - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    May 2007
    Mesajlar
    9.440
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    7.394 Toplam

    Standart Cevap: Mgcamd 1.30b Kathrein

    Tja schwer zu sagen. Welches Image, und wie sieht deine mg_cfg aus??


    Wieso Box type: openbox ??


    Fehler sind hier:
    Conax.Key error 2: No such file or directory
    Keys readed
    Conax.Key error 2: No such file or directory
    M: parse error
    D: parse error 1

    .....
    [mg0] No supported encryption system found
    [mg0] stopped


    Wieso zeigt es bei dir die version 1.26 an?



    Ausserdem gibt es eine neuere version versuchs mal damit.
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    AlıntıAlıntı

  4. #4
    Junior Member derknipser - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jun 2008
    Mesajlar
    2
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    0 Toplam

    Standart AW: Mgcamd 1.30d Kathrein

    nun ja, ich habe schon das Rar-File von Dir genommen.
    Kann es aber gerne noch einmal versuchen.

    Die startet leider gar nicht.
    Fehlermeldung:
    /program # ./_start_emu
    /program/mgcamd: /program/mgcamd: 1: Syntax error: "(" unexpected



    Kurze Randbemerkung: Ich habe eine UFS822.
    Konu derknipser tarafından (14.06.2008 Saat 15:38 ) değiştirilmiştir.
    AlıntıAlıntı

  5. #5
    Administrator d-king - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    May 2007
    Mesajlar
    9.440
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    7.394 Toplam

    Standart Cevap: AW: Mgcamd 1.30d Kathrein

    Alıntı derknipser Nickli Üyeden Alıntı [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    ..Kurze Randbemerkung: Ich habe eine UFS822.

    Wahrscheinlich liegt da das problem. Das Binäres ist wohl für UFS910.
    AlıntıAlıntı

 

 

Benzer Konular

  1. MgCamd Menü WebIF (Kathrein UFS910)
    Von d-king im Forum Kathrein Addon, Plugin, Scripte
    Cevaplar: 0
    Son Mesaj: 19.05.2008, 12:17
  2. MGCamd 1.30 Kathrein icin
    Von d-king im Forum Kathrein SoftCam, Cam, EMU
    Cevaplar: 0
    Son Mesaj: 29.04.2008, 12:47
  3. MGcamd und Kathrein
    Von GoldMan im Forum Kathrein SoftCam, Cam, EMU
    Cevaplar: 2
    Son Mesaj: 17.01.2008, 19:39
  4. BoxCracker V1 MgCamd Edition Kathrein UFS-910
    Von Dreamboxer im Forum UFS 910
    Cevaplar: 2
    Son Mesaj: 4.12.2007, 16:45
  5. Mgcamd Kathrein UFS910
    Von d-king im Forum Kathrein SoftCam, Cam, EMU
    Cevaplar: 0
    Son Mesaj: 7.11.2007, 11:45

Bu Konudaki Etiketler

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  

Page generated in 1.711.717.589.61498 seconds with 21 queries Sayfa Boyutu (237340)