turk-dreamworld.com Sitesine Hoşgeldiniz.


7 sonuçtan 1 ile 7 arası
  1. #1
    Senior Member docea37 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Mar 2013
    Mesajlar
    442
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    1.042 Toplam

    Standart MgCamd 1.38 Yardım

    merhaba bir sorum olacaktı.
    ben yeni aldımgigablue 800se yi.
    2 adet cccam yüklü çalışıyor. bir yerden mgcamd kodları geldi. /var/keys OR /usr/keys içinde mg_cfg adlı dosyanın içine öncekileri silip
    M: { 01 }
    C: { 01 }
    A: { 01 }

    diye başlayan kodları yapıştırdım ve ch modu 755 yaptım.

    /var/keys OR /usr/keys içinde newcamd.list dosyanın içinede

    CWS_KEEPALIVE = ****
    CWS_INCOMING_PORT = ****
    CWS_MULTIPLE = ***** server 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server2

    kaydedip ch modu 755 yaptım. asıl yazanları **** bu şekilde yazıyorum siteye.
    softcam setuptan mgcamd işaretleyim tamamla çıkıyorum ama çalışmadı. cihazda mgcamd 1.38 yüklü.
    AlıntıAlıntı

  2. #2
    TDW Team-S-Mod. kocahaydar - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jul 2008
    Bulunduğu yer
    Germany
    Mesajlar
    29.337
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    111.692 Toplam

    Standart Cevap: MgCamd 1.38 Yardım

    Ustam MGCamd CS yapmak istiyorsaniz, satirlar /usr/keys vea /var/keys icinde peer.cfg dosyasina eklenmesi gerek.

    Örnek:
    M: { Dreambox IP { 12345678 }}
    D: { ServerIP { port1 port2 { 23456789 { A3 A3 }}}}


    CWS satirlari newcamd.list dosyasine ekleniyor. Oda /usr/keys veya /var/keys icinde yerlestirilcek.

    Sundugum tüm dosyalar test amaclidir.
    Yanlis kullanmada veya herhangi bir problem oldugunda herkes kendisi sorumludur.
    Kesinlikle Mesuliyet kabul etmiyorum.
    AlıntıAlıntı

  3. #3
    TDW Team-S-Mod. kocahaydar - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jul 2008
    Bulunduğu yer
    Germany
    Mesajlar
    29.337
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    111.692 Toplam

    Standart Cevap: MgCamd 1.38 Yardım

    Bunun disi N satir varsa bunu direkmen CCcam.cfg dosyasinada ekleyebilirsiniz.

    Sundugum tüm dosyalar test amaclidir.
    Yanlis kullanmada veya herhangi bir problem oldugunda herkes kendisi sorumludur.
    Kesinlikle Mesuliyet kabul etmiyorum.
    AlıntıAlıntı

  4. #4
    Senior Member docea37 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Mar 2013
    Mesajlar
    442
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    1.042 Toplam

    Standart Cevap: MgCamd 1.38 Yardım

    sorun mgcamd ı hiç çalıtıramadım. cccam ile mgcamd ayrı çalışsada olur şimdilik.
    AlıntıAlıntı

  5. #5
    TDW Team-S-Mod. kocahaydar - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jul 2008
    Bulunduğu yer
    Germany
    Mesajlar
    29.337
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    111.692 Toplam

    Standart Cevap: MgCamd 1.38 Yardım

    O konuda yardimci olamiycagim. Gigablue bende malesev yok deneyemiyorum ve MGCamd tarafindan destek varmi bilmiyorum.
    Bunun disi hangi soft yüklü olduguda önemli.

    Sundugum tüm dosyalar test amaclidir.
    Yanlis kullanmada veya herhangi bir problem oldugunda herkes kendisi sorumludur.
    Kesinlikle Mesuliyet kabul etmiyorum.
    AlıntıAlıntı

  6. #6
    Member sabri63 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Oct 2008
    Mesajlar
    48
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    8 Toplam

    Standart Cevap: MgCamd 1.38 Yardım

    dosya nerede tessekurler
    AlıntıAlıntı

  7. #7
    Member Brady - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2008
    Mesajlar
    95
    Total 'Thanks' Received by This User :
    2 Bu Konu icin
    32 Toplam

    Standart Cevap: MgCamd 1.38 Yardım

    Öncelikle Selam.

    Konuyla alakali MgCamd ayarlarini sunayim belki yardimci olabilirim.

    MgCamd Soft.Key, peer.cfg, newcamd.list, cccamd.list, mg_cfg gibi dosyalar hepsi var/keys dosyasina atilir.

    Eger CCcam line eklenmek isteniliyorsa asagidaki gibi eklenti yapip.

    cccamd.list
    Kod:
    C: XXXDYNDDNSXXX 12000 USER PASS no { 0:0:2 }
    mg_cfg
    Kod:
    G:32
    P:02
    N: satiriniz varsa

    newcamd.list
    Kod:
    CWS= dyndnsadres 15001 User Passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server
    mg_cfg
    Kod:
    G:01
    P:00
    Asagida örnek mg_cfg dosyasi ayartlari

    Kod:
    # EMM messages
    #	00 don't show any EMMs (default)
    #	01 show only valid EMMs
    #	02 show valid and bad EMMs with complete data display
    M: { 01 }
    
    # ECM messages
    #	00 don't show anything about ecm
    #	01 normal mode, show pids processed, decoded ecm and cw
    #	02 verbose mode, show valid and bad ECMs with data
    C: { 01 }
    
    # AU
    #	00 disable, no emm pids processed
    #	01 enable, emm pids always processed for soft-au and shared cards
    #	02 auto, emm started only if channel cant be decoded
    #	03 process emm pids for network cards update only
    A: { 03 }
    
    # key update (sum 01 or 02 with 04)
    #	01 update only new keys, default setting
    #	02 update all keys (used for valid PMK checking)
    #	04 enable TPS au
    #	+ tps SID, which pmt pid contains au pid
    U: { 02 } 0x12c0
    
    # config files folder (softcam, autoroll, ignore/priority)
    #	00 files in /var/keys
    #	01 files in /tmp
    T: { 00 }
    
    # network mode, use summ for several clients
    #	00 no network (default)
    #	01 newcamd netclient
    #	02 radegast netclient
    #	04 camd3 netclient
    #	08 gbox netclient
    #	16 ONLY gbox, improved simulcrypt (used together with 08 = 24)
    #	32	cccamd netclient, card list saved as /tmp/cccamd.info 
    #		(ECM only, supported server version up to 2.1.1, later not work)
    G: { 33 }
    
    # network retry, use summ for several options
    #	00 disable
    #	01 retry every new ecm
    #	02 try to connect to offline shares every Q: seconds
    #	04 try to detect and fast reconnect to lost (and not used atm) server
    #	+ XX messages number and YY seconds to reconnect
    #	mg will reconnect to server, if no answer to last XX ecm/keepalive or
    #	if no answer for last ecm or keepalive sent for YY seconds
    #	set to 0 to disable
    N: { 07 } 5 30
    
    # network ecm timeout in seconds
    K: { 08 }
    
    # newcamd dead routes connect retry, sec
    Q: { 600 }
    
    # network shares priority
    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast
    P: { 00 }
    
    # on screen display type
    #	00 No OSD (default)
    #	01 neutrino
    #	02 enigma
    #	03 relook
    #	+ user password for http auth
    O: { 00 } root coolstream
    
    # on screen display Options, summ of:
    #	01 show emu ecm 
    #	02 show network shares messages
    #	04 show decoding failed / fta
    #	08 show emm keys update
    #	+ web port to use for osd
    S: { 03 } 80
    
    # Log option, summ of:
    #	00 off
    #	01 network udp log
    #	02 log to console
    #	04 file, appended ! delete it by yourself, before it eat all your hdd
    #	+ IP udp-port log-file-name
    L: { 02 } 192.168.0.18 28007 /tmp/mgcamd.log
    
    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value, 
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 350 }
    
    # cache option, summ of:
    #	00 Off (default)
    #	01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    #	02 Ecm data cache, remember CW for (E:) time 
    #	04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }
    
    # reread files, summ of: 
    #	00 No (default)
    #	01 reread config file on channel change (including priority and ignore, but not replace/cache)
    #	02 reread SoftCam.Key on channel change
    #	04 reread SoftCam.Key if file changed
    R: { 00 }
    
    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 31 }
    
    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    # 06 dreambox/mips
    B: { 00 }
    
    # Mapping 18xx
    # 00 disable mapping
    # 01 map 18xx to 1801
    F: { 00 }
    umarim yardimci olabildim biraz.
    AlıntıAlıntı

  8. Teşekkür edenler:

    foox (22.11.2018) , tutu2004 (13.07.2013)

 

 

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  

Page generated in 1.711.617.313.03628 seconds with 22 queries Sayfa Boyutu (249505)