Sim2-newnigma2_daily_lean_dm800se_20161001-#84d-FE-CU-Jasper-20161008

[kalkan99]

Sim2-newnigma2_daily_lean_dm800se_20161001-#84d-FE-CU-Jasper-20161008

changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

CU
added the Clone Update Plugin (v4.0) to upgrade your image online


Sim2

SSL84d

Enigma2: 2016-06-16-tarball
################################################## #######################################

Webinterface is working.
Teletext is working.
WLAN is working

################################################## #######################################

Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)

################################################## #######################################

No WLAN driver included (this is a feature of Newnigma Lean image):

The following drivers are available on the online feed:

Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:

opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c

reboot
################################################## #########################################
Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it

3. Reboot your box (this is important also if you just use an already ext3 or ext4 formatted USB memory stick without initialize)

4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

################################################## #########################################

Update your image online:

Please check that you have 9 MB free flash memory before you start the update.

Menu
Plugins
Start SOA Clone Updater 4.0
"Upgrade-your-Image" and press OK
"Restart-your-Receiver" and press OK

The image will be updated
################################################## #########################################



Download:

2016-10-08

Yetersiz haklar yüzünden gizli iceriği göremessinız.

[tagtis]

teşekkürler

[Serdar_T_T]

tesekkürler