LibreELEC 8.2 builds for Amlogic S905/S905D/S905X devices.
Read this first: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Important notes:
- These are unofficial, community supported builds so please post all bugs/issues in this forum area only.
- I work on these builds in my free time. I also don't know a lot of things so please be kind and patient if you encounter any bugs.
- Bugs? Read this first: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
- if you choose a device tree with LIRC support, you have to configure your remote control from the scratch (amremote cannot work toghether with LIRC)!
- I'd like to thank [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] for lots of work on improving Nougat kernel to a very usable state!
Note on downloads:
---------------------------
- for Odroid-C2 download image with -C2 suffix
- for every other device use image without suffix...
- ..unless you are experiencing freezing: then use -temp_sensor_disabled version
- If upgrading from 7.0/8.0 builds remember to update the device tree!
If you forgot to use a new device tree or used wrong one and your device doesn't boot:
----------------------------------
- don't panic!
- if booting from SD/USB, simply connect SD/USB to your computer, download a proper device tree, rename it to dtb.img and place on SD/USB
- if booting from internal:
- Boot this build from SD card or USB with correct device tree.
Login over SSH and execute dd if=/dev/zero of=/dev/dtb bs=256k count=1 then dd if=/flash/dtb.img of=/dev/dtb bs=256k
Power off, remove SD/USB, boot from internal.
8.1.10 (2017-10-08)
Downloads: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
If you don't know which file to download, get this one: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Device trees: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Changelog:
- merged upstream LE 8.2 changes
- Kodi:
updated to 2c0a184 (latest pre-17.5 revision)
fixed integer frame rates (e.g. 24p, 60p) - Broadcom WiFi driver updated to 1.363.59.144
- added BCM4334 support
- added support for a few RTL8188EU WiFi USB dongles
- fix booting for Khadas VIM
- reverted some K-series DVB driver changes for hopefully improved DVB-T channel scaning
- added support for s905_autoscript by balbes150
Known issues and important notes:
- SAMBA/SMB/Shared folder issues? Read [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] first
- RGB mode doesn't work
- 3D switching sometimes causes a crash
- Built-in DVB tuners are supported only for "K" series devices and WeTek Play 2. For "K" series I use driver from [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] with some modifications, please do not report issues with the driver to him! If you want support, please use builds from [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] .
- Supported internal WiFi chips: Broadcom (all), Realtek (all) and Qualcomm QCA9377. Other chips, e.g. 9082xs and SSV6051 are not supported because manufacturers show middle finger on every driver request.
- 4K support is experimental.
- 3D and HDR are not supported, i.e. they might work but I don't provide support.
- CEC might not work when your box has incompatible u-boot or your TV is not that well supported by Amlogic low-level CEC driver.
- External DVB tuner support is experimental via media_build drivers from CrazyCat69.
If you like my work, you can [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] (or without PayPal account: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız])
Kod:
8.1.10-rc1 (2017-10-06)
Downloads: Index of/s905/8.2/8.1.10-rc1/
If you don't know which file to download, get this one: LibreELEC-S905.arm-8.2-8.1.10-rc1.img.gz
Device trees: Index of /s905/8.2/device_trees/
Changelog:
merged upstream LE 8.2 changes
Kodi:
updated to 2c0a184 (latest pre-17.5 revision)
improved GUI smoothness
fixed integer frame rates (e.g. 24p, 60p)
Broadcom WiFi driver updated to 1.363.59.144
added BCM4334 support
added support for a few RTL8188EU WiFi USB dongles
fix booting for Khadas VIM
8.1.9 (2017-09-23)
Downloads: Index of/s905/8.2/8.1.9/
Device trees: Index of /s905/8.2/device_trees/
Source code: 8.1.9
Changelog:
merged upstream LE 8.2 changes
WiFi drivers:
updated Broadcom drivers
added AP6359SA support (not tested)
updated all Realtek drivers
fix S905X performance regression (thanks to croc for pointing this out)
Odroid-C2: add CEC configuration to boot.ini
optimised RAM usage a little bit
8.1.8 (2017-09-16)
Downloads: Index of/s905/8.2/8.1.8/
Device trees: Index of /s905/8.2/device_trees/
Source code: 8.1.8
Changelog:
merged upstream LE 8.2 changes
BlueBorne vulerability kernel fix
8.1.7 (2017-09-13)
Downloads: Index of/s905/8.2/8.1.7/
Device trees: Index of /s905/8.2/device_trees/
Source code: 8.1.7
Changelog:
Kodi:
update to 07424d3 (latest Krypton code version available)
disable autoscrolling while on screensaver and while opening streams (taken from RPi patchset)
merge upstream LE 8.2 commits
added SSV6051 driver (still a little bit experimental)
improve exFat performance by using kernel module instead of fuse (thanks to escalade )
led_sys is now a kernel module (should fix improper LED colour on some devices)
cleaned up kernel config a bit
added a kernel patch to enable autorepeat for all HID devices (thanks to vevs and vpeter )
added some button mappings for Xiaomi BT remote (thanks wrxtasy )
suspend/sleep can now be enabled if it works for you ([Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız])
8.1.6 (2017-08-27)
Downloads: Index of/s905/8.2/8.1.6/
Device trees: Index of /s905/8.2/device_trees/
Source code: 8.1.6
Changelog:
Kodi: update to 17.4 final
merge upstream LE 8.2 commits
improve Broadcom WiFi stability
revert QCA9377 firmware to 1.0.0-3 for improved speed and stability
use a custom R848 tuner driver to improve stability (thanks @afl1)
8.1.5 (2017-08-18)
Downloads: Index of/s905/8.2/8.1.5/
Device trees: Index of /s905/8.2/device_trees/
Source code: 8.1.5
Changelog:
Kodi: fix "no signal" during 3D autoswtich
Kodi: add non-linear stretch for HW-decoded videos
Kodi: don't use slide animations in Estuary by default
simplify Broadcom firmware config file
fix no LE logo if u-boot does not detect HDMI properly
revert all RGB-related changes (this needs to be investigated further)
update qca9377 driver
8.1.4 (2017-08-13)
Downloads: Index of/s905/8.2/8.1.4/
Device trees: Index of /s905/8.2/device_trees/
Source code: 8.1.4
Changelog:
merged latest upstream LE 8.2 changes
libcec: prevent from stopping without a warning (forward ported patch from S805 builds)
8.1.3 (2017-08-06)
Downloads: Index of /s905/8.2/8.1.3/
Device trees: Index of /s905/8.2/device_trees/
Source code: GitHub - kszaq/LibreELEC.tv at 8.1.3
Changelog:
Kodi: reverted a backport that reportedly broke PVR
merged latest upstream LE 8.2 changes
updated WP2 DVB module to make it work with Nougat kernel (thanks to [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] )
libamcodec: fix missing symbols (should fix loading aml platform in Moonlight)
updated qca9377 firmware
Odroid-C2: add amremote/LIRC switch in boot.ini
make images smaller by trimming unneeded firmware blobs (backported from LE master and added PCI firmware trimming)
libcec: bump to f2c4ca7
8.1.2 (2017-07-26)
Downloads: Index of /s905/8.2/8.1.2/
Device trees: Index of /s905/8.2/device_trees/
Source code: GitHub - kszaq/LibreELEC.tv at 8.1.2
Changelog:
hopefully fix RGB output switch
fixed kernel crash during 3D autoswitch
include Kodi patch from johngalt to always switch display mode on start - this should keep colorspace changes
backported [AML] PTS switch rework / disable switch for 64bit linux-os by peak3d · Pull Request #12564 · xbmc/xbmc · GitHub to hopefully fix stuttering after a few hours of playback
8.1.1 (2017-07-23)
Downloads: Index of /s905/8.2/8.1.1/
Device trees: Index of /s905/8.2/device_trees/
Device trees with LIRC support: soon
Source code: GitHub - kszaq/LibreELEC.tv at 8.1.1
Changelog:
Kodi updated to b22184d
merged latest LE 8.2 branch updates: Comparing 85436ab...24c4484 · LibreELEC/LibreELEC.tv · GitHub
removed amvideocap and stmmac kmsg spam
reverted color space kernel to allow forcing RGB output (thanks johngalt )
optimized a bit
8.1.0 (2017-07-19)
Downloads: Index of /s905/8.2/8.1.0/
Device trees: Index of /s905/8.2/device_trees/
Device trees with LIRC support: soon
Source code: GitHub - kszaq/LibreELEC.tv at 8.1.0
Changelog:
"full Nougat" kernel with 4K output fixed and lots of playback improvements thanks to johngalt work: [TESTING][S905(X)] 10bit/HDR/Dithering Test Builds & Discussion
fully rebased on LibreELEC 8.2 branch
Odroid-C2:
add LED support
add GPIO-IR driver (thanks to Raybuntu for porting)
improved udpate scripts
lots of other little improvements that I don't remember
Paylaş