Tiger SOFTWARE UPGRADE TOOL 4M - 03.01.2019



⦁ Open SCom tool,and connect the COM,and click the open sport button,you can see some logs if succeed.


⦁ Select BootRom,and then reset STB


⦁ Click the file button,and select the file named: btinit_ddr2_400m_debug.img,and then click Send File button


⦁ After finish sending the file,cick the file button again,and select the file named:uboot_default.img,click Send File button
⦁ After finish sending the file,there will print some U-boot message,that means you are already entry the u-boot mode


⦁ rename the upgrade sw file to flash.bin,and then storage it in the USB,and plug it in the device
⦁ Copy this command to the tool:
usb start;fatload usb 0 83000000 flash.bin;sf burn 83000000 0 0x400000;reset


⦁ click the manual sned button
⦁ Wait for about 1min after the device reset,than upgrade successfully

Download:
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]