turk-dreamworld.com Sitesine Hoşgeldiniz.


8. sayfa - 16 sayfa var BirinciBirinci ... 456789101112 ... SonuncuSonuncu
157 sonuçtan 71 ile 80 arası
  1. #71
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200524 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.

    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  2. #72
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200525 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.

    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.

    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.

    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.

    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  3. #73
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200527 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.

    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.


    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  4. #74
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200529 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.


    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  5. #75
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200604 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.

    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.


    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  6. #76
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.aarch 9.80-devel

    LibreELEC-ARM-ALL.aarch 9.80-devel 20200605 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.

    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  7. #77
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200611 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.

    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  8. #78
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.arm 9.80-devel

    LibreELEC-ARM-ALL.arm 9.80-devel 20200615 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.


    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

  9. #79
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC-Kodi19-WeTek_Play_2.arm-9.80-nightly

    LibreELEC-Kodi19-WeTek_Play_2.arm-9.80-nightly

    LibreELEC-WeTek_Play_2.arm-9.80-nightly
    KODI 19.0 ALPHA1


    Kernel 5.7.2
    20200618


    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    AlıntıAlıntı

  10. #80
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.157
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.955 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC-ARM-ALL.aarch 9.80-devel

    LibreELEC-ARM-ALL.aarch 9.80-devel 20200618 Test İmage

    MSD Kart
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Manuel Update
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1.
    This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
    please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
    to moved to other threads.


    2.
    The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
    your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
    standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
    used in all new systems.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
    system is fully compatible with Armbian etc systems for TV boxes.


    Please note that the DTB configuration order has changed.
    Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
    is used for configuration DTB all platforms.
    Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
    to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
    correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
    file (uEnv.txt) strings from other platforms.


    Pay attention.
    The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
    Be sure to make a full backup of eMMC before installing it in eMMC.
    For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
    you need to update the multiboot.


    Fix for correct color to G12
    For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
    image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


    Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
    changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
    has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
    files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
    for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
    (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
    in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


    Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
    during installation, or you can return to the current state of the system in eMMC before performing the installation.
    Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
    version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


    Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
    görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
    güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
    yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
    (harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
    kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
    s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.


    EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
    sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
    geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
    görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
    başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
    AlıntıAlıntı

 

 
8. sayfa - 16 sayfa var BirinciBirinci ... 456789101112 ... SonuncuSonuncu

Benzer Konular

  1. Cevaplar: 86
    Son Mesaj: 11.01.2019, 12:28
  2. [Wetek] LibreELEC KODI-18 Leia for platform Amlogic S9xxx
    Von usta_399 im Forum Wetek Librelec
    Cevaplar: 13
    Son Mesaj: 18.12.2018, 08:46
  3. Cevaplar: 0
    Son Mesaj: 17.05.2018, 22:53
  4. [Wetek] WetekPlay LibreELEC Test Kodi 9.0 -WeTek_Play.arm-pr
    Von usta_399 im Forum WeTec Linux, Enigma2
    Cevaplar: 1
    Son Mesaj: 20.04.2018, 16:45
  5. Cevaplar: 0
    Son Mesaj: 4.12.2017, 09:52

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  

Page generated in 1.711.647.107.80082 seconds with 23 queries Sayfa Boyutu (318465)