LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150
LibreELEC-ARMv8.aarch64-9.80-devel
LibreELEC-ARMv8.aarch64-9.80-devel 20200911 Test İmage
MSD Kart
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Manuel Update
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.
2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec
on your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of
the standard firmware via the USB Burn Tool and the new activation of the universal multi-boot,
which is used in all new systems.
Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of
multi-loading system is fully compatible with Armbian etc systems for TV boxes.
Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file
(uEnv.txt) is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to
edit this file to configure it. You need to uncomment the two lines that are responsible for your
platform and specify the correct DTB for your model. If you use this image to run on the one platform,
you can delete it from the settings file (uEnv.txt) strings from other platforms.
Pay attention. Starting from version 20200826, the configuration order for the used DTB changes.
Please note that the algorithm for initial configuration of the system for startup has changed. Instead
of a file "uEnv.txt", is now used the file "/extlinux/extlinux.conf " . The rules for editing a file remain the same.
You no longer need to manually add the u-boot.ext file , it is included in the image.
Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation
in eMMC. Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly
on AML, you need to update the multiboot.
Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write
the image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
Important. Changed the directory location of the images. Now all images (for all supported platforms) are in one place.
Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate
TAR files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of
images for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905
chip (in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.
Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest version
using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.
Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC*de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.
EMMC*ye yüklemeden önce eMMC*nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC*deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC*de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
Paylaş