turk-dreamworld.com Sitesine Hoşgeldiniz.


3. sayfa - 16 sayfa var BirinciBirinci 123456713 ... SonuncuSonuncu
157 sonuçtan 21 ile 30 arası
  1. #21
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200110
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200110
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    The new version of the LE images 20200110
    *******************************************
    Please note, now on the site I upload only one TAR file to update for the entire group of devices.
    1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
    2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
    coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
    full recovery of the standard firmware via the USB Burn Tool and the new activation of the
    universal multi-boot, which is used in all new systems.


    The new version of images 20191209. This version changes the DTB setting principle for
    the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
    use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
    have a problem not the correct color of the Kodi interface, you need to use the SD card to
    write the image and additionally download and copy the file to the SD card (u-boot.ext).


    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    AlıntıAlıntı

  2. #22
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200113
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200113
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    The new version of the LE images 20200113
    *******************************************
    Please note, now on the site I upload only one TAR file to update for the entire group of devices.
    1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
    2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
    coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
    full recovery of the standard firmware via the USB Burn Tool and the new activation of the
    universal multi-boot, which is used in all new systems.


    The new version of images 20191209. This version changes the DTB setting principle for
    the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
    use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
    have a problem not the correct color of the Kodi interface, you need to use the SD card to
    write the image and additionally download and copy the file to the SD card (u-boot.ext).


    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    AlıntıAlıntı

  3. #23
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200114
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200114
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    The new version of the LE images 20200114
    *******************************************
    Please note, now on the site I upload only one TAR file to update for the entire group of devices.
    1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
    2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
    coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
    full recovery of the standard firmware via the USB Burn Tool and the new activation of the
    universal multi-boot, which is used in all new systems.


    The new version of images 20191209. This version changes the DTB setting principle for
    the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
    use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
    have a problem not the correct color of the Kodi interface, you need to use the SD card to
    write the image and additionally download and copy the file to the SD card (u-boot.ext).


    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    AlıntıAlıntı

  4. #24
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200115
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200115
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.


    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.

    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

  5. #25
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200124
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200124
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.

    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

  6. #26
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200130
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200130
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.

    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

  7. #27
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200201
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200201
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.

    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

  8. #28
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200205
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200205
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.

    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

  9. #29
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200206
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200206
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.

    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

  10. #30
    TDW Team-S-Mod. usta_399 - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Dec 2016
    Mesajlar
    38.158
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    2.957 Toplam

    Standart Cevap: LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

    LibreELEC KODI 19 @balbes150

    LibreELEC KODI 19 @balbes150

    WeTek Play 2 için Boot.ini dosyası:
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    LibreELEC KODI 19
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200210
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    Son Derleme Sürümü: 20200210
    [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

    1. This thread is for discussion of LibreELEC images created by myself.
    If you prefer to use another OS, please keep discussion about that OS in
    other forums. Off-topic posts about other OS will be deleted to moved to
    other threads.

    2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
    If you want to switch between distros you will need to clear the stored u-boot
    configuration first. The mainline kernel does not allow access to the u-boot
    environment from userspace, so this is easiest done by restoring the original
    firmware of the device using Amlogic "USB Burn Tool" software. If using CE
    or other distros that still use the legacy (vendor) u-boot the u-boot environment
    can be cleared from within the OS before switching.


    Test images LibreELEC KODI-19 for platform Amlogic S9xxx
    To start the system from external media, you must use a universal multi-boot. This
    variant of multi-loading system is fully compatible with Armbian etc systems for TV
    boxes. If it is already activated with the previous images, you do not need to repeat
    the activation.
    AlıntıAlıntı

 

 
3. sayfa - 16 sayfa var BirinciBirinci 123456713 ... SonuncuSonuncu

Benzer Konular

  1. Cevaplar: 86
    Son Mesaj: 11.01.2019, 12:28
  2. [Wetek] LibreELEC KODI-18 Leia for platform Amlogic S9xxx
    Von usta_399 im Forum Wetek Librelec
    Cevaplar: 13
    Son Mesaj: 18.12.2018, 08:46
  3. Cevaplar: 0
    Son Mesaj: 17.05.2018, 22:53
  4. [Wetek] WetekPlay LibreELEC Test Kodi 9.0 -WeTek_Play.arm-pr
    Von usta_399 im Forum WeTec Linux, Enigma2
    Cevaplar: 1
    Son Mesaj: 20.04.2018, 16:45
  5. Cevaplar: 0
    Son Mesaj: 4.12.2017, 09:52

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  

Page generated in 1.711.662.514.82897 seconds with 24 queries Sayfa Boyutu (291762)