[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


Kodi 18.7.1 (Linux Kernel 4.19.x)
LibreELEC-RPi4.arm-(Leia)9.2.3.img



[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

by CvH · Published June 4, 2020 · Updated June 4, 2020


LibreELEC 9.2.3 (Leia) the final version has arrived based upon Kodi v18.7.1.


Changes since 9.2.1/9.2.2:


improvements for the RPi
several minor updates
Kodi 18.7.1



Change for Raspberry 4:


With LE 9.2 and later you need to add “hdmi_enable_4kp60=1“ to your config.txt if
you want to use 4k output at the RPi4. Before you needed “hdmi_enable_4k=1“ that
is now deprecated.


Raspberry 4:
It would be nice to have the 4B running the latest mainline kernel as other devices
in LibreELEC 9.2, but adding support for an all-newSoC chipset is a huge effort and
the Pi Foundation needed to align initial 4B software with the current Raspbian
release to maximise compatibility with existing software and to keep the workload
sensible. Generic x86/64 devices are running Linux 5.1, while Raspberry Pi devices
(0/1/2/3/4) are using Linux 4.19 with some new/extra code.


In this initial release 1080p playback behaviour and performance on the 4B are
broadly on-par with the previous 3B/3B+ model, except for HEVC media which is
now hardware decoded and massively improved. New 4K video capabilities still
have plenty of rough edges to be smoothed out, but the Pi Foundation developers
have been pushing fixes to the test team at a phenomenal rate over the last month
and that will continue as the userbase expands.


The 4B now uses SPI flash for the bootloader. Current firmware supports SD card
boot only – Network and USB booting are still on the Pi Foundation to-do list. Also
on the list is HBR audio (current audio capabilities are the same as the 3B) and
3D video. The 4B hardware is HDR capable, but software support has a dependency
on the new Linux kernel frameworks merged by Intel developers (with help from
Team LibreELEC/Kodi) in Linux 5.2 and a kernel bump will be needed to use them.
Once the initial excitement and activity from the 4B launch calms down, serious
work on HDR and transitioning Raspberry Pi over to the new GBM/V4L2 video pipeline
can start.


Rockchip:


Our Rockchip releases remain in an state with limited support. The Kodi version is
updated but there are no significant video/audio improvements to the Rockchip 4.4
kernel codebase – and none planned. Our work on Rockchip support has refocussed
onto the Linux 5.x kernel to use the modern kernel frameworks needed for the
next-generation Kodi video pipeline. This work is progressing nicely, but it means
the 4.4 codebase “is what it is” until a future kernel bump.


Amlogic


Our original goal was to announce Allwinner and Amlogic images alongside Rockchip
as part of the LibreELEC 9.2 release, but while overall readiness has greatly improved
in recent months – each has specific technical challenges to overcome before they
meet our basic critera for a public release. On the human side of the project several
maintainers also have reduced availability for support due to work and family commitments.
Combining these factors together, the team felt it was better to be patient and not rush releases.


So instead of releasing LibreELEC 9.2 stable images, we are announcing the start of
official nightly images from our master development branch.


If you experience problems, please open an thread at our forum. You can also open an ticket
at our issue tracker.


Upgrading


On first boot the Kodi media database will be upgraded. Depending on your hardware and
media collection size this could take several minutes. Please be patient.


@by CvH Thanks
@LibreELEC Team Thanks



İmajımızı zip veya rardan çıkartıp MSD Karta kart yazma programıyla yazıyoruz Burada DTB
(bcm2711-rpi-4-b.dtb) dosyası imajın içinde hazır geldiğinden hiç bir şey yapmamıza gerek yok
sistem kurulumda otomatik seçiyor imajı yazdırdığımız MSD Kartı cihazımızın alt kısmında
MSD kart girişine takıyoruz ve cihazımızı başlatıp aynı kodi kurulumu gibi yönergeleri kendimize
göre ayarlıyoruz ayrıca hangi eklentileri kurmak istiyorsak kurulumlarını yapıyoruz ve cihazımızı
medya cihazı olarak kullanmaya başlıyoruz.


MSD Kart Kullanımı Videolu anlatım
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


Downloads


Direct link
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


MSD Card
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


Manuel Update
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


Nand
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


FTP giriş bilgileri kullanıcı: root şifresi: libreelec