CnxCAM ver.0.1.0.3 beta2

NEW IN ver.0.1.0.3 beta2:
+ MenuID's changed back (for some reasons wasnt working with ProgDVB)



INSTALLATION:

ProgDVB:
1. Copy CnxCAM.dll and CnxCAM.ini file into the Plugin or the root folder.
2. Change the COM port from CnxCAM.ini file (Default value is COM=1).

MyTheatre:
1. MDWrapper is required if you are using MyTheatre.
2. Copy CnxCAM.dll and CnxCAM.ini file into the MDPlugins folder.
3. Change the COM port from CnxCAM.ini file (Default value is COM=1).



ABOIT THE INI FILE:

Ini file is used to storage CnxCAM settings.I suggest that you use always latest ini file.
The default settings looks like this:

[SETUP]
ACTIVE=1
[COM]
COM=1
DTR=1
TIMEOUT=15
INIT_ON_CH=0
[EMM]
USE_EMM=1
EMM-S=1
EMM-U=1
[LOGGING]
LOG_ACTIVE=1
LOG_SET=1
LOG_ECM=0
LOG_EMM=0
LOG_EMM_ALL=0
LOG_COM=1



HOW TO USE THE INI FILE:

SETTING VALUE

[SETUP] - Main settings.
ACTIVE - [0/1] This activates the automatical plugin activation during software startup.
[COM] - COM port settings.
COM - [0-*] Place here your COM port number.
DTR - [0/1] (Data Terminal Ready) Should be set to 1.
TIMEOUT - [0-*] This affect on the timeout of reading from your card.
INIT_ON_CH - [0/1] This is temporary setting. If you set it to 1, CnxCAM will initialize the card every time you change the channel.
[EMM] - EMM settings are used to enable EMM updates.
USE_EMM - [0/1] Set this to 1 to activate EMM updates.
EMM-S - [0/1] Set this to 1 to activate EMM-S(Shared Group Addressed EMM's) updates.
EMM-U - [0/1] Set this to 1 to activate EMM-U(Unique or User Addressed EMM's) updates.
[LOGGING] - Logger settings (logger works only if CnxCAM is active.)
LOG_ACTIVE - [0/1] Set this to 0 if you don't want to log anything from CnxCAM.
LOG_SET - [0/1] Activates action logger.
LOG_ECM - [0/1] Activates the ECM and DCW logger.
LOG_EMM - [0/1] Activates the EMM logger (Logs all EMM's your card receives.)
LOG_EMM_ALL - [0/1] I don't suggest you to enable that one, because it will log all EMM packets and will slow CnxCAM a lot.
LOG_COM - [0/1] Activates the COM port logger.



IMPORTANT !!!
If you are using the older version of CnxCAM, please do not send any of your log files to the public.
I don't take any responsibility if your card get deactivated because of the CnxCAM. Use it at your own risk.



HISTORY:

ver.0.1.0.3 beta
+ Card initialization and communication changed to the Conax Embedded standard.
+ Removed COM activity data logger for the security reasons.
+ Fixed few small COM port issues.
+ Changed DCW sending procedure.
+ Optimized some timings.
+ EMM update for unactive cards.
+ Changed MenuID's

ver.0.1.0.2 beta
+ Support for EMM-S and EMM-U packets.
+ Logging interface



KNOWN BUGS:
- With Nexus-CA and ProgDVB invalid EMM pid.



Thanks to:
- JoshyFun for all your help
- Tibrisch for help and testing.



Bugreports at : [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]


Regards,
Joker

[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]