new nds blocker

[dsmartnds]

arkadaşlar yeni cıkmış new nds blocker alan deneyen varmı ataklarda calışıyormuş deniyor .ederide 400 ytl diye söyleniyor.

bende eski illagal brother blocker var bunu geri alıp üzerine fark ücreti ödeyerek new blocker alma imkanımız varmı? yoksa yenisini tekrar 400 ytl veripmi alacagız eskiler elimizdemi kalacak ne olacak bu konuda bilgisi olanlar yardımcı olursa sevinecegim

[-=sezo=-]

Arkadasim bu Platform ne ise yararki? birde gidip 400 YTL Blockerin degeri olsun.
Bende oldugu günlerde sadece 2 defa Galatasaray macina baktim,onun icinmi 400 YTL edecek?

[sarilar]

Arkadasim bu Platform ne ise yararki? birde gidip 400 YTL Blockerin degeri olsun.
Bende oldugu günlerde sadece 2 defa Galatasaray macina baktim,onun icinmi 400 YTL edecek?

aynen sezo ustaya katiliyorum

[dsmartnds]

arkadaşlar beni yanlış anladınız galibaş ben alalım demedim. eski aldıgımız bloker elimizdemi kaldı yenisi ayrıca almak zorundamı kaldık demek istedim .


eskiyi alıp yeniyi verseler iyi olurdu aradaki fark verilirdi .d smart atack yapmayı keser inşallahda kimse zor durumda kalmaz

[pedras]

Hello..sorry to be in english...please where i can find tutorial for Dsmart blocker??Our translator turk to english..

best regards

[m1rek]

eskıyı gerı alırsa alınır yoksa hayatta vermem o parayı kek arıyorlar wallaa!! kesınlıkle vermeyın o parayıı

[duke3d]

evet kesinlikle almayın adam yeni bloker cıkaracagına yeni yazılım verir eski bloker lara zaten duyduguma göre yeni cıkanlarda saglıklı calışmıyormuş

[star79]

yeni blocker alacaginiza kartinizi newcs yapin ve au hakkii kapatin ve bir kullanmadiginiz dm 500 gözden cikartin hepsi bu kolay gelsin buyurun confler.

<?xml version="1.0" ?>
- <!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

** This is the example file for Dreambox/TD etc. that use SCI interfaces.


-->
- <newCSconfig>
- <readers name="Card Readers">
- <device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
- <!-- <boxkey>0000000000</boxkey>
-->
- <!-- <rsa>0000000000</rsa>
-->
<......-camkey>0000000000000000</......-camkey>
<......-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</......-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
- <!-- <device>
-->
<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>Yes</blocksa>
<blockua>Yes</blockua>
<blockga>Yes</blockga>
- <!-- <boxkey>0Bxxxxxxxx</boxkey>
-->
- <!-- <rsa>0000000000</rsa>
-->
<......-camkey>0000000000000000</......-camkey>
<......-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</......-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0808</pincode>
<priority>round</priority>
- <!-- </device>
-->
- <device>
<name>smargo</name>
<type>phoenix</type>
<mhz>600</mhz>
<parity>none</parity>
<node>/dev/usb/ttyUSB0</node>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>Yes</blockga>
<blockc0>No</blockc0>
<boxkey>00000000</boxkey>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
- <sid>
<allow />
- <deny>
<id />
</deny>
</sid>
</device>
</readers>
- <radegastserver>
<enabled>No</enabled>
<port>16000</port>
- <allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
- <cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
- <httpd>
- <server>
- <!-- Port to accept connections on
-->
<port>8080</port>
<enabled>yes</enabled>
</server>
- <user>
- <!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive).
-->
<name>newcs</name>
- <!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive).
-->
<password>newcs</password>
- <!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console
-->
<accesslevel>admin</accesslevel>
</user>
</httpd>
- <debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
- <newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
- <user>
<name>test</name>
<password>test</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
- <user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
- <readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>

[setere]

burayı biraz açabilirmisiniz?

[gino29]

newcs de kart yanmiyor mu?