Modified v1.5.3 Image.

The QBox is much more than just a Dream ... It's a Reality.

New in this update:
Updated Channel list
Latest data.bin and keys loaded
Underwrld 1.11 added
Canal Digitaal now open with Underwold Emu.

Please Note:
There may be a short delay in opening Canal Digitaal CHANNELS
as the keys may need to auto update.

Key updaters:
[SatfreaksEmu Pack Downloader]
[HackSat v9b]
[Luxsat v3.0]
To access the above, just click the Blue button.

Customise your QBox BootLogo:
If you would like to customise your QBox bootup logo, post the image in
jpeg format [zipped] at the link below, that you would like to use as your
bootup image, and I shall convert it for you to install on to your QBox.

How to Install the Backup Image:
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the
receiver to turn it off, and then wait for a minimum of 5 seconds
before turning back on.

After the boot logo has been displayed, there will be a delay of upto 1
minute, during the boot process the ['Duolabs QBox One] logo will be
displayed intermitantly, so you will know the loading process is active.

Default Settings:
The default satellite is: Astra 1 [19.2e]
Russia Today is the default channel on startup
CCcam is the default Emu
Language: English
Time Zone: GMT

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red
button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow
button in Emustarter, or highlight and click CCcam or MGCamd

To activate an Emu:
1 .. If a channel don't auto open in 10 seconds try options 2 or 3
2 .. Change channel, and that will activate the selected Emu.
3 .. Go directly back into the Emustarter options, and highlight and click
ENIGMA, after a short pause it will restart using the selected Emu.

How To select Premiere Direkt PPV channels:
Simply view the Premiere Direkt Portal channel, and press the Green button.

Updating Keys:
Click the Blue button then select any one of the Key updaters, if you use
[HackSat v9b] then select [mgcamd] first and then click the OK button.

Card Readers:
Both the Top & Bottom Card reader's will only work with GBox Emu.
Only the Bottom Card reader is working with all other Emu's.

CS:
GBox & CCcam okay, just click the Blue button, and select whichever you require.


[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]