turk-dreamworld.com Sitesine Hoşgeldiniz.


2 sonuçtan 1 ile 2 arası
  1. #1
    TDW Team-S-Mod. kocahaydar - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Jul 2008
    Bulunduğu yer
    Germany
    Mesajlar
    29.337
    Total 'Thanks' Received by This User :
    3 Bu Konu icin
    111.692 Toplam

    Standart How to Upgrade the Latest Image of ET9200 via USB memory stick

    How to Upgrade the Latest Image of ET9200 via USB memory stick

    Preparation
    1) Download the '9200-image-20111015.zip' file in the ET9200 menu on this website.
    2) Unzip the downloaded file then 'et9x00' folder will be appeared.
    3) Copy that folder into the USB Medium

    Insert USB medium into either USB sockets on the front or rear panel.
    Power Off and Power On through the powerswitch at the rear panel of the box.

    After Power On, ET9200 will detect if there is ET9200 Image available on the USB medium.
    On the frontpanel display will been shown if there is ET9200 bImage found.
    To load the ET9200 Image you'll need to press the "OK" button which you can find on the frontpanel behind the clep on the right side. (OK button is the third button counting from right to left)
    ET9200 gets into state of upgrading. The Image will be load and on the frontpanel display you can see the process.
    Please be patient because it will take couple of minutes to finish upgrade.
    The box will startup automatically after the upgrade is finished.

    -Warning-
    During upgrading, please don't unplug power or shut down STB.
    Don’t power off within 5 seconds after upgrade is completed.

    -Important Note-
    Don’t upgrade the Bootloader and Image at the same time.
    Make sure that in the USB stick only needed files for either Bootloader or Image should be contained while processing for either Bootloader upgrade or Image upgrade.

    Sundugum tüm dosyalar test amaclidir.
    Yanlis kullanmada veya herhangi bir problem oldugunda herkes kendisi sorumludur.
    Kesinlikle Mesuliyet kabul etmiyorum.
    AlıntıAlıntı

  2. Teşekkür edenler:

    iskenders (11.06.2020) , ozhaloaga (31.08.2019) , berkenkey (17.04.2012)

  3. #2
    TDW Team-S-Mod. berkenkey - ait Kullanıcı Resmi (Avatar)
    Üyelik tarihi
    Mar 2012
    Mesajlar
    11.886
    Total 'Thanks' Received by This User :
    0 Bu Konu icin
    30.025 Toplam

    Standart Cevap: How to Upgrade the Latest Image of ET9200 via USB memory stick

    Bilgi için teşekkürler.
    AlıntıAlıntı

 

 

Benzer Konular

  1. Vu+ DUO USB Stick ile Image / Software yüklemek ,
    Von d-king im Forum VU+ FAQ, Tarife
    Cevaplar: 1
    Son Mesaj: 17.05.2016, 11:49
  2. igo primo out of memory
    Von fb34 im Forum IGO Primo Sorunlar, Çözümler
    Cevaplar: 7
    Son Mesaj: 22.08.2013, 10:53
  3. How to Upgrade the Latest Bootloader of ET9200 via USB memory stick
    Von kocahaydar im Forum XTrend ET9000, 9200, 9X00
    Cevaplar: 1
    Son Mesaj: 17.04.2012, 15:38
  4. Cevaplar: 4
    Son Mesaj: 16.04.2009, 23:03

Yetkileriniz

  • Konu Acma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  

Page generated in 1.711.692.759.46998 seconds with 15 queries Sayfa Boyutu (221482)