Chinese PNA unlock

[by_kernekli]

Here you are the RedNight v1.8!


English version
resolution only:480x272

You can choose from four menu colors.
It works on WinCE5 or CE6 (64-128MB RAM)
Tested : MIO C520, and some YuanFeng PNA-s ( Wayteq n770 BT; 820BT; 920BT; 850) and Iconx A410(Asus clone)
I think it runs on other PNA-s.
Size :370MB! (without navigation softwares)


Links (only rapidshare):

Yetersiz haklar yüzünden gizli iceriği göremessinız.

rarpass:kamillo

Important!
Read the "Readme!.txt" file before use the SI!!! (in the pack)

installing intro same then rednight 1.7:

Yetersiz haklar yüzünden gizli iceriği göremessinız.

------------------------------------------------------------

I N S T A L L

------------------------------------------------------------

STEP 1:
-------
- Copy the SI(extract files and maps) to the memorycard or to the inside drive .(MIO only memcard!!)

STEP 2:
-------
- Run the „mobilenavigator.exe”file.
- You receive a first message:
"Wait, the settings are running!"
- Get one second message:
"The PNA restarts now after the initialisation. If this would not occur at your PNA (for example popup an error message) , then make a manually reset!"
- Tap on the „ok” button.
- Get one third message:
"After the restart run the ""mobilenavigator.exe"" file!"
- Tap on the „ok” button.

STEP 3:
-------
- Run the „mobilenavigator.exe”file again after restart.
- Select a color!
- Wait, while you receive a message:
"The PNA useful already now!"

STEP 4:
-------
- Enjoy it!


Info:
There is not need for these steps already after setup if you retart the SI.


------------------------------------------------------------

Only MIO c520 ,c720 users!!!!

------------------------------------------------------------


STEP 1:
--------
- Copy the SI to memorycard.
Don’t put the memcard into the PNA!

STEP 2:
--------
- Do a Hardreset! (Push the turning off button until approximately 10 seconds).

STEP 3:
--------
- Switch on the PNA and wait for it while loads the factory menu.
- Put the card into the PNA and wait. (a little time will start going by again).

STEP 4:
--------
- Wait for it while loads the factory menu.
- Select the „Tools”then select the „File explorer”. Doubleclick on the Rednight_SI icon in the window.

- You receive a first message:
"Wait, the settings are running!"
- Get one second message:
"The PNA restarts now after the initialisation. If this would not occur at your PNA (for example popup an error message) , then make a manually reset!"
- Tap on the „ok” button.
- Get one third message:
" After the restart run the ""mobilenavigator.exe"" file!"
- Tap on the „ok” button.

STEP 5:
--------
-Do it after the restart:
- Select the „Tools”then select the „File explorer”. Doubleclick on the Rednight_SI icon in the window.
- Select a color!
- Wait, while you receive a message:
"The PNA useful already now!"
- Enjoy it!
---------------------------------------------------------------------

------------------------------------------------------------

I M P O R T A N T ! ! !

------------------------------------------------------------

Do not use my SI without setup!!!
Many things get to his place under the time of setup.
The SI watches a what kind of operating system runs on your machine at the time of setup and what kind of driving ones there are in him.
The SI writes some values of registry under installing. (games etc)!
Don't worry, your PNA will not a brick!


What do, if you botched it the navigational programs , or "My..." apps selection ?
You have two opportunities.
a) Rename the application selected incorrectly.Then you click his icon again then and browse again.
b) There is a menuitem in the "Settings" menu on the second sheet : the " Recovery". If you use this (run), it deletes all own settings however!

If you do not want to use this SI already, restart the PNA and use the factory menu.


If you do a hardreset or delete registry (recovery onto factory value) in the PNA , you must reinstall the RednightSI!!!

Before you install, RUN the „0_START.EXE” file in the mobilenavigator directory.
(the path: for example SDMMC\mobilenavigator\0_START.EXE)

-You receive a message if you did it well:
"The launch numerator was zeroed. Run the "mobilenavigator.exe" file!”
-Tap on the „ok” button.
-Start the STEP 2!


thanks kamillo

[birinci]

bu programı kurdum sdmmc den çalışıyor.
çalışmakta olan bir igo programım var onu nevigasyon bölümündeki igo ikkonuna aktarmak istiyorum.
bununla ilgili komutu nereye vede ne şekilde bir ifadeyle yazmalıyım.

[sonic]

menu icinde text dosyasinda komutlat yaziyor olmasi gerek
bunu ben hic denemedim onun icin yardimci olamam

[madboy1977]

emege saglik kardesim