HTC HD2 Flashing Your First NAND Android Rom [For Newbs]

[felek]

HTC HD2 Flashing Your First NAND Android Rom [For Newbs] xda dan alintidir

I wrote this thread for users who need more newb friendly instructions on flashing a NAND Android Rom to their phones.

IF YOU HAVE ANY QUESTIONS PLEASE READ THE [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] BEFORE POSTING!!

*DO NOT start another process while any flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver (on your pc) activate*
Any of these can lead to a bad flash and possibly brick your phone


Requirements BEFORE Starting with this guide

1. You need a RADIO which supports 576 RAM (2.08 or later should be fine)
2. You need HARDSPL 2.08 installed on your device to flash MAGLDR
3. Download MAGLDR 1.11 package from [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] and extract to an empty folder
4. Download NAND Android package from [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] and extract to an empty folder
* There are other NAND Android Roms available in the HD2 Android Development Forum *

NOTE: You do NOT need to flash a Stock Rom before starting this, a Custom Rom will be fine as long as you have HardSPL 2.08 and a 576 RAM compatable Radio

If you dont have 1 or 2 on your phone then goto [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] thread for instructions on how to install HardSPL and update your Radio

-------------------------------------------------------
-------------------------------------------------------

YouTube Video thanks to ocm7: [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

-------------------------------------------------------
-------------------------------------------------------

1. FLASH MAGLDR TO YOUR DEVICE

The Original MAGLDR Thread by Cotulla is [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]

NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it.

1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.

NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear

-------------------------------------------------------
-------------------------------------------------------

2. FLASH YOUR ANDROID ROM

The Original NAND Android Thread by Cotulla is [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting

* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 4: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND

-------------------------------------------------------
-------------------------------------------------------

3. FLASHING A NEW NAND ANDROID ROM OVER A PREVIOUS ONE

Once you have flashed Magldr to your device you do not have to go through the whole process again if you want to flash a new NAND Android Rom:

1. Turn your phone off
2. Restart your phone by holding down the 'Power' button until the Magldr Menu appears
3. Press the 'Volume Down' button to goto Option 4: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
4. Browse to the folder you extracted your NAND Android Rom files to on your pc, right click on Run DAF.exe and select Run as Administrator
5. Since you already have a NAND Android Rom on your phone you will be asked if you want to keep your existing data
6. Read ALL the text and then select 'Next'
7. Read the information and select 'Next'
8. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
9. When flashing is complete your phone will Reboot and proceed to boot Android from NAND

-------------------------------------------------------
-------------------------------------------------------

4. UNINSTALLING MAGLDR AND NAND ANDROID

To uninstall Magldr and any Android Rom that you installed to NAND, download a Stock Rom from [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız] (for LEO512 ONLY, LEO1024 users will have to use a TMOUS compatable Stock Rom). Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen and then run the Stock Roms .exe file. This will flash a Stock Rom and Radio while keeping your HardSPL untouched.

You can also flash a Custom Rom to uninstall Magldr in exactly the same way if desired.

-------------------------------------------------------
-------------------------------------------------------

Useful Information

How to Enter the Magldr Menu Screen
1. Turn your phone off
2. Long Hold the Power Button until the Magldr menu appears


How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.

*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.