DuckTales ilk Enigmna2 Alptha Image Kathrein UFS icin sunuyor. Assagidaki Resimler ile ispat ediliyor. Daha henüz beta ve degisik Hatalar var. Hardwarein bazi funsiyonalri icin destek yok. Egere hardware/linux-dvb-api hakkinda bilginiz varsa bizimle kontakga gecerseniz hosgeldin deriz.
Bu Enigma2 Imagi Serial & Sebeke üzeri denemek isterseniz, Receivere baglanmak icin yürüyen bir NFS Server sart.
1. tgz Dosyasini Server acin ve /etc/export Dizinini ayarlayin.
örnek:
/nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check)
2. NFS Serveri yeninden calisdirin.
3. Serial konsol üzeri Recivere bagkanin
4. Reciveri Arkadan acin ve Tastaturda Entere basin ve konsolede bunu göreceksiniz.
Hit any key to stop autoboot: 0
STB7100-REF>
5. Sebeke ayarlarinizi assagidaki IP lere göre ayarlayin ve Konsoleye aynisini yazin ve tirnak isareti ile ayirin.
"set ipaddr '192.168.0.25'"
"set serverip '192.168.0.1'"
"set gateway '192.168.0.1'"
6. bootarg tipini ayarlayin:
"set bootargs 'console=ttyAS0,115200 root=/dev/nfs nfsroot=/nfs/target_enigma2 rw ip={$ipaddr}:{$serverip}:{$gateway}:255.255.255.0: kathrein:eth0ff mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:${ethaddr}'"
"setenv bootcmd 'nfs a5000000 {$serverip}:/nfs/target_enigma2/boot/uImage;bootm a5000000'"
nerede /nfs/target_enigma2 diziniyse /etc/exports dosyasina ekleyin.
7. Ayarlari "saveenv" yazarak kaydedin.
8. Ister yeniden calisdirin veyahut Recieiveri arka dügmeden acarak calisdirin, simdi Enigma2 calismasi lazim.
selamlar DuckTales Teaminden.
Sade Dev Ustalar bizimle Kontaga gecsin [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
================================================
team DuckTales proudly presents the first enigma2 alpha image for Kathrein UFS-910.
This image should be seen as a proof of concept - there are many bugs and some hardware
which is not supported at the moment. If you are a developer, and you have experience in
(embedded)hardware/linux-dvb-api coding feel free to contact us - you're welcome!
To test this enigma2 image you need a running nfs server and a serial & network
connection to the receiver.
1. extract the tgz file on the server and set the directory in /etc/exports
for example:
/nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check)
2. restart nfs server
3. connect via serial console to the receiver
4. turn on the receiver and hit enter in serial console
you should see the following prompt:
Hit any key to stop autoboot: 0
STB7100-REF>
5. customize the follwoing settings to your network environment and type them into the
serial console (without the doublequotes):
"set ipaddr '192.168.0.25'"
"set serverip '192.168.0.1'"
"set gateway '192.168.0.1'"
6. to set the bootargs also type:
"set bootargs 'console=ttyAS0,115200 root=/dev/nfs nfsroot=/nfs/target_enigma2 rw ip={$ipaddr}:{$serverip}:{$gateway}:255.255.255.0: kathrein:eth0ff mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:${ethaddr}'"
"setenv bootcmd 'nfs a5000000 {$serverip}:/nfs/target_enigma2/boot/uImage;bootm a5000000'"
where /nfs/target_enigma2 is the directory you added to /etc/exports
7. to save the settings type "saveenv"
8. simply type "boot" or restart the receiver with the power-switch. now enigma2 should boot.
greetings from team DuckTales
ONLY devs can contact us at [Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]
Paylaş