As FLAS USB: FlashTools 1.0.2 + USB Drive

I was doing a couple of experiments na me and what I LOAD. Delicate which is the Jodie. Total, that I was leaving the error 79. Something that was corrupt database. It seems that simply replace was sufficient, but not had access that although I responded by FTP and telnet, was not able to recognize the password. I do not know, something was missing the system by charging.

Well as I have not seen here by explaining how FLAS by usb, as you said to me has worked.
1) install the FlashTools
2) connected by the client to usb-pc. A printer cable.
3) Turn off the deco lighting and the re taking the power button front.
4) Wait a bit and the display appears USB upgrade
5) In the PC will tell you that there is a new device, is designed to usb drivers attached to this post.
6) Open flash tools, you'll usb tab, select the file and press down

I have once again put the same image and had no problems.

by sergiotas
[Değerli Ziyaretci, linki görmeniz icin bu mesaja cevap yazmanız gerekiyorÜye olmak icin burayı tıklayınız]